AQUASEAL - ASG
Single Component Waterproofing Compound
AQUASEAL – ASG is a single component ready to use, anti-sagging, highly thixotropic waterproofing compound and base primer for external paint. It is based on a water based Acrylic polymer dispersion and properly selected fillers. On total curing, it provides a flexible and waterproof membrane, which is breathable and highly elastic for excellent waterproofing.
UNIQUE FEATURES
Cement materials have some major deficiencies that limit their usefulness. AQUASEAL - ASG is specially designed to combat the shortcomings of cement and cement based products, particularly its poor adhesion, low flexural strength, low impact strength and thin section fragility.
ADVANTAGES
» Single component and very easy to use since most painters, masons and skilled applicators, all can use it with ease.
» Available in white, grey, black and limited attractive shades
» Has excellent adhesive properties & binds to porous and non-porous surfaces.
» While repelling water, it allows the substrate to breathe, so that trapped vapours can escape, thus preventing peeling and blistering.
» Can be over coated with water based paint systems.
» Is unaffected to UV light or dilute acids and alkalis.
» Is high durable even when in continuous contact with water.
» AQUASEAL - ASG is non toxic and non flammable.
» Highly economical when used as waterproofing membrane as compared to other polymer based waterproofing systems.
TYPICAL APPLICATIONS
1. Sealant for walls and ceilings with dampness or leakages due to water seepages from outside walls and terraces.
2. Ideal for use around windows and door frames, between wall and skirting boards.
3. Waterproof coating for roofs & terraces.
4. Waterproofing for toilets, kitchens, basements and foundations.
5. Repairing of concrete and masonry walls – internal and external by cement mortars.
6. Waterproof lining for water retaining structures like tanks and swimming pools.
7. Renovating and protecting concrete against corrosion and salt unlike conventional coatings which equire 7-8 days cure of concrete. This coating can be applied to 24 hour old concrete, thereby, giving immediate protection.
8. Base coat on exterior surface as a primer for all types of acrylic exterior paints.
APPLICATION METHOD
For Waterproofing Application :
Mix the material properly. Damp down the concrete surface with clean water. Whilst damp, BUT FREE OF STANDING WATER, apply using a short, still bristle brush or roller. Trowel application can be undertaken as necessary. Each coat should be a minimum of 0.3 mm (300 microns) thick. Minimum two coats are to be applied. Apply the second or subsequent coats after the previous coat has dried.
COVERAGE
Depends upon application and nature of substrate. On a typical surface to be waterproofed, a coverage of 10 – 12 square feet per litre can be achieved.
COVERING CAPACITY
This will depend upon the method of application and nature of the substrate. INFINITY ACRYLIC EMULSION covers 10-12 sq.meters per litre for two coats.
For Primer Application :
Mix the material properly. Thinning should be done with clean water. Add 1 part of water to 1.5 parts of AQUASEAL – ASG. Apply 1 or 2 coats as per requirement. A time period of atleast 4 hours should be allowed between 2 coats.
COVERAGE: On a typical surface 100 – 110 square feet per litre can be achieved per coat.
SURFACE PREPARATION
As with all coating systems, remove all grease, dust, fungus and algae and loose material. This can be done by grinding, scrapping, water or sand blasting, acid washing or any other suitable method. For sealant/crack filling, it is advisable to develop the crack into a ‘V’ groove. It is advisable to maintain a Width : Depth ratio of 2 : 1.
CURING OF AQUASEAL - ASG COATINGS
As such AQUASEAL - ASG does not require any water curing. During the first 6 hours after application, it must be protected from abrasion, rain and other adverse conditions. During this period no water has to be used on the coating. The coating should then be allowed to air dry for 3 days before submerging in water. Ponding with water for 28 days itself is a waterproofing test. CLEANING OF TOOLS AND EQUIPMENTS
Tools and equipments can be easily cleaned with water.
PACKING
1,5 and 20 Lts.