Evertex
Decorative and Protective Textured Finish
EVERTEX is a water-based protective and decorative textured wall finish. It’s unique formulation makes it the most reliable paint for Indian climatic conditions.
PROPERTIES
EVERTEX is composed of unique thermoplastic resin, siliceous aggregates, light fast pigments and special additives. It protects surfaces from rain, sun, dust, industrial gases and other atmospheric pollutants.
» forms a tough film with excellent abrasion resistance
» imparts resistance to surface against fungal, algal and mould growth
» has excellent adhesion to substrate
» has very good covering capacity
» is extremely washableg
RECOMMENDED USES
EVERTEX can be used for interior and exterior applications. After the application of a suitable primer, it can be used on a wide variety of surfaces – plaster, stucco, brick work, stone, concrete etc.
SURFACE PREPARATION
The surface to be painted should be clean, dry and free from dirt and grease. The surface should be free from efflorescence, fungus and algae growth. First prime the surface well with a coat of cement paint or Legacy Primer.
APPLICATION
Can be applied by brushing, rolling or stippling.
For stippling apply a thick coat at supplied viscosity.
For brushing, thin 1 litre of paint with 400-450 ml of water and then start application.
The second coat should be applied after an hour of drying.
COVERING CAPACITY
This will depend upon the method of application and nature of the substrate.
EVERTEX covers 4-5 sq. meters per litre when stippled. 8-10 sq. meters per litre when brushed with one coat and 4 sq. meters per litre when brushed with two coats.
PACKING
EVERTEX is available in 20 litres, 4 litres and 1 litre packing.